The fog light will play a big role in the case of low visibility. There are fog lights on the car now, but the lights will not guarantee that she will not break, so what we have to ensure is that we should replace it in time.
Steps for replacing and installing fog lamps:
Began to start, the first step is to remove the screws. First kill the steering wheel in one direction. Did you see the two screws on the bezel? Unscrew them both.
Let 's start to remove the cover below. It 's necessary to pierce the buckles one by one. This requires patience. Although the cards are relatively tight, as long as you can find the right direction, you can easily pull them down in the direction. Violent ha. Take off the hood. Did you see the fog lamp plug above?
It should be noted here that when we install the fog lamp, we must remove the part I circled, otherwise the fog lamp will be uneven, leaving a large gap, obsessive-compulsive disorder like me is absolutely tolerable Nope. You can install it next. Do you understand the in-situ installation? I won't go into details. You can take a detailed look at the owner's manual for the power-up steps. In my impression, it is the No. 10 relay and the No. 23 fuse. Let's take a look.
Notes for replacing and installing fog lamps:
的 The point to emphasize, and the point that is particularly important, is to turn on the limit of fog lights!
Front fog light: The function of the front fog light is not to illuminate, but to provide a high-brightness diffused light source. The intensity of this light source is to penetrate the dense fog and remind the driver of the opposite side, although it can illuminate a small piece Place, but if used under normal conditions, it is enough to dazzle the eyes of the driver opposite. In this case, it is an unethical behavior to turn on the front fog lamp. It is recommended not to use it under normal circumstances, but only in dense fog. Even in heavy rain conditions, you only need low beams, and fog lamps will not help you.